AMS Solar Building
Components being installed for 5Kwp GRID-TIE Solar PV System as follows:
- 20 pieces of 260Watts ACPV MODULE with built-in Micro-Inverter at the
Back of Solar Panel (i.e. Latest Technology PV System)
- 20 Units of 250Watts 240V/60Hz PowerBridge Micro Inverter
- 2 Units of 20A Miniature Circuit Breaker
- 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
- 1 set Digital Meter for Voltage, Current and Power Indicator
- 1 piece 63A/2P/230V AC Disconnect Switch
- 1 set of Wall Mounted 4 holes Enclosure box
- 100m of 3.5mm sq. THHN Cable as a home run cable for grid connection.
- Complete set of installation materials such as Solar Panel Mounting
Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.
- Complete installation and commissioning.
Components being installed for 600Watts OFF-GRID Solar PV System as a Back-up Power in case of brownout as follows:
- 6 pieces of 100Watts Solar Panels
- 1 unit of 24 Volts / 1,000 Watts Pure Sine Wave Inverter With built-in
Battery Charger Function
- 1 unit of 20A/24V MPPT Solar Cahrge Controller
- 4 units of 105Ah/12V Deep Cycle Maintenance free Battery
- 1 set of 32A DC Miniature Circuit Breaker from Solar panel to Controller
- 1 set of 63A DC Miniature Circuit Breaker from Battery to Inverter
- 1 set of 20KA~40KA/600V DC Surge Protector Device
- 30 meters of 4mm square solar cable from Rooftop to Controller
- Complete sets of installation materials for Solar Panel Mounting, MC4
Connectors, Cable lugs, battery cables, etc
- Battery Stand
- Complete installation and commissioning.
NOTE: The system is TIE ON THE GRID with no battery required. Its is designed to generate an estimated electrical output of approximately between 750Kwhr ~ 825Kw-hr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day.
Components being installed for 5Kwp GRID-TIE Solar PV System as follows:
- 20 pieces of 260Watts ACPV MODULE with built-in Micro-Inverter at the
Back of Solar Panel (i.e. Latest Technology PV System)
- 20 Units of 250Watts 240V/60Hz PowerBridge Micro Inverter
- 2 Units of 20A Miniature Circuit Breaker
- 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
- 1 set Digital Meter for Voltage, Current and Power Indicator
- 1 piece 63A/2P/230V AC Disconnect Switch
- 1 set of Wall Mounted 4 holes Enclosure box
- 100m of 3.5mm sq. THHN Cable as a home run cable for grid connection.
- Complete set of installation materials such as Solar Panel Mounting
Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.
- Complete installation and commissioning.
Components being installed for 600Watts OFF-GRID Solar PV System as a Back-up Power in case of brownout as follows:
- 6 pieces of 100Watts Solar Panels
- 1 unit of 24 Volts / 1,000 Watts Pure Sine Wave Inverter With built-in
Battery Charger Function
- 1 unit of 20A/24V MPPT Solar Cahrge Controller
- 4 units of 105Ah/12V Deep Cycle Maintenance free Battery
- 1 set of 32A DC Miniature Circuit Breaker from Solar panel to Controller
- 1 set of 63A DC Miniature Circuit Breaker from Battery to Inverter
- 1 set of 20KA~40KA/600V DC Surge Protector Device
- 30 meters of 4mm square solar cable from Rooftop to Controller
- Complete sets of installation materials for Solar Panel Mounting, MC4
Connectors, Cable lugs, battery cables, etc
- Battery Stand
- Complete installation and commissioning.
NOTE: The system is TIE ON THE GRID with no battery required. Its is designed to generate an estimated electrical output of approximately between 750Kwhr ~ 825Kw-hr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day.