Mila’s Inland Hill Resort

Components being installed for 10Kwp GRID-TIE Solar PV System:

The system is using ACPV MODULES with built-in APS Micro Inverter installed at the back of the Solar Panel.

  • 38 sets of 265 Watts JINKO Poly Solar Panels (i.e. Tier 1 / Class AAA)
  • 19 Units of APS YC-500 Micro Inverter installed at the back of Solar

Panels

  • 3 Units of 20A Miniature Circuit Breaker
  • 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
  • 1 piece ECU Unit for Real Time Online Monitoring via WEB
  • 1 piece 63A/2P/230V AC Disconnect Switch
  • 1 set of Wall Mounted 6 holes Enclosure box
  • 120m of #12 AWG THHN Cable as a home run cable for grid connection.
  • Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.

  • Complete installation and commissioning.

 

NOTE: The system is TIE ON THE GRID with no battery required. Its is designed to generate an estimated electrical output of approximately between 1,500Kwhr ~ 1,650Kw-hr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day.