Projects

Components for 1HP Solar Water Pump System

• 1 set of 1HP Solar Water Pump (Sun Pumps – Made in USA)
• 1 set Solar Water Pump Controller (Sun Pumps – Made in USA)
• 8 pieces of 100Watts Mono Solar Panels (Sunworth)
• 1 Unit of 63A DC Miniature Circuit Breaker
• 1 Unit of 20KA~40KA / 385V AC Surge Protective Device
• 1 piece of Wall Mounted 3 holes Enclosure box
• 1 length of 5/16 inch x 6ft copper grounding rod for grounding purposes.
• 50 meters of 6mm sq. Solar PV Cable from Solar Panel to the Controller
• 1 set of MC4 Branch Connector for parallel connection for 2 array
• 1 set of MC4 Connectors
• Complete set of installation materials such as Solar Panel Mounting
  Aluminum Rails, Mid Clamps, End Clamps and L-Foot
• Complete installation and commissioning of Solar PV system

Components:

• 20 units of 250Watts Poly Solar Panels
• 1 Unit 5Kw GoodWe String Type Grid Tie Inverter
• 1 unit of 32A / 2P Schneider AC Miniature Circuit Breaker from Solar Panel to Grid Tie Inverter
• 1 unit of 20KA~40KA/385V AC Surge Protector Device
• 1 unit of 63A 2P Disconnect Switch
• 100meters of 6mm square Slocable PV Cable
• 1 piece of 3 meters long Grounding Rod
• 1 complete set of Aluminum Solar Mounting Materials such as Aluminum railings, L-Foot, End Clamps and Mid Clamps.

The system has an estimated power being generated between 600 Kw-hr ~ 750 Kw-hr per month. With a savings between P5,000  ~ P6,000 per month.

The system is already approved for NET METERING by CEBECO.

Components for 2Kw Grid-Tie Solar PV System

• 8 sets of 265 Watts ACPV MODULE with built-in APS Micro-Inverter at the Back of Solar Panel (i.e. Latest Technology PV System) Hybrid Design
• 1 Unit of 20A Miniature Circuit Breaker
• 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
• 1 set of Digital Meter Display Unit for Voltage and Power Monitoring
• 1 piece 63A/2P/230V AC Disconnect Switch
• 1 set of Wall Mounted 4 holes Enclosure box
• 100m of 3.5mm sq. THHN Cable as a home run cable for grid connection.
• Complete set of installation materials such as Solar Panel Mounting
• Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.
• Complete installation and commissioning.

The system has an estimated power being generated between 280Kw-hr ~ 330Kw-hr per month. With a savings between P2,500  ~ P3,000 per month.

Components for 500Watts OFF- GRID Solar PV System as a Back-up Power in case of brownout as follows:

• 2 pieces of 265 Watts JINKO Poly-Crystalline Solar Panel ( i.e. Tier 1 / Class AAA)
• 1 unit of 24 Volts / 1,000 Watts Pure Sine Wave Inverter With built-in Battery Charger Function and Built-in 30A PWM Solar Charge Controller
• 2 units of 170Ah/12V Deep Cycle Maintenance Free Battery (NorthStar)
• 1 set of 32A DC Miniature Circuit Breaker from Solar panel to Controller
• 1 set of 63A DC Miniature Circuit Breaker from Battery to Inverter
• 1 sets of 20KA~40KA/600V DC Surge Protector Device
• 30 meters of 4mm square solar cable from Rooftop to Controller
• Complete sets of installation materials for Solar Panel Mounting, MC4 Connectors, Cable lugs, battery cables, etc
• Battery Stand
• Complete installation and commissioning.

A.) Components for 5Kw Grid-Tie Solar PV System

• 19 sets of 265Watts ACPV Modules with built-in APS SYSTEM Micro Inverter at the back of solar panels
• 2 units of 32A / 2P Schneider AC Miniature Circuit Breaker
• 1 unit of 20KA~40KA/385V AC Surge Protector Device
• 1 unit of 63A 2P Disconnect Switch
• 1 set of ECU for ONLINE REAL-TIME WEB Monitoring
• 100meters of 3.5mm square THHN Cable as a homerun connection from the grid supply
• 1 piece of 3 meters long Grounding Rod
• 1 complete set of Aluminum Solar Mounting Materials such as Aluminum railings, L-Foot, End Clamps and Mid Clamps.

The system has an estimated power being generated from 600 Kw-hr ~ 750 Kw-hr per month. With a savings between P5,000  ~ P6,000 per month.

B.) Components for 500Watts OFF- GRID Solar PV System as a Back-up Power in case of brownout as follows:

• 2 pieces of 265 Watts Poly-Crystalline Solar Panel ( i.e. Tier 1 / Class AAA)
• 1 unit of 24 Volts / 1,000 Watts Pure Sine Wave Inverter With built-in Battery Charger Function and Built-in 30A PWM Solar Charge Controller
• 2 units of 170Ah/12V Deep Cycle Maintenance free Battery (NorthStar)
• 1 set of 32A DC Miniature Circuit Breaker from Solar panel to Controller
• 1 set of 63A DC Miniature Circuit Breaker from Battery to Inverter
• 1 sets of 20KA~40KA/600V DC Surge Protector Device
• 30 meters of 4mm square solar cable from Rooftop to Controller
• Complete sets of installation materials for Solar Panel Mounting, MC4 Connectors, Cable lugs, battery cables, etc
• Battery Stand
• Complete installation and commissioning.

Components being installed for 500Wp OFF-GRID Solar PV System:

Complete installation of OFF-GRID Solar System as follows:

• 2 sets of 260 Watts Polycrystalline Solar panels
• 1 unit 1Kw/24V Heavy Duty Pure Sine Wave Inverter with Built-in 30A

PWM Solar Charge controller

• 2 units of 200A/12V Deep Cycle Maintenance Free Battery
• 1 Unit of 32A DC Miniature Circuit Breaker from Solar Panel to Controller
• 1 Unit of 63A DC Miniature Circuit Breaker from Inverter to Battery
• 1 Unit of 20KA~40KA / 600V DC Surge Protector Device
• 1 set of Wall Mounted 3 holes Enclosure box
• 20m long of 4mm sq. Solar PV Cable
• Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors, MC4 Branch Connectors, Inverter cable, other accessories, screws, etc.

• Battery Stand
• Complete installation and commissioning.

Components being installed for 99.32Kwp GRID-TIE Solar PV System:

The system is using 3 Phase STRING TYPE OF INVERTERS

• 382 pieces of 260 Watts Poly-Crystalline Solar Panel
• 2 Units of 33Kw MPPT 3 Phase String Type Grid-Tie Inverter
• 1 Unit of 36Kw MPPT 3 Phase String Type Grid-Tie Inverter
• 1 piece Data Logger for Real Time Online Monitoring via WEB
• 1 set of 125KVA 3Phase 400V Transformer
• 2 pieces 400A/3P/240V AC MCCB Disconnect Switch
• 1 set of 225A/3P/240V AC MCCB Switch unit
• 2 sets of 60A/3P/240V AC MCCB Switch unit
• 1 set of 70A/3P/240V AC MCCB Switch unit
• 4 sets of Wall Mounted Enclosure box
• 3000 meters of 6mm square PV Cable.
• Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.

• Complete installation and commissioning.

NOTE: The system is TIE ON THE GRID with no battery required. Its is designed to generate an estimated electrical output of approximately between 15,000Kwhr ~ 16,500Kw-hr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day.

Components being installed for 10Kwp GRID-TIE Solar PV System:

The system is using ACPV MODULES with built-in APS Micro Inverter installed at the back of the Solar Panel.

• 39 sets of 260 Watts ACPV MODULES with built-in APS Micro-Inverter

installed at the back of Solar Panels. (i.e. Latest Technology PV System)

• 3 Units of 20A Miniature Circuit Breaker
• 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
• 1 piece ECU Unit for Real Time Online Monitoring via WEB
• 1 piece 63A/2P/230V AC Disconnect Switch
• 1 set of Wall Mounted 6 holes Enclosure box
• 150m of #12 AWG THHN Cable as a home run cable for grid connection.
• Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.

• Complete installation and commissioning.

NOTE: The system is TIE ON THE GRID with no battery required. Its is designed to generate an estimated electrical output of approximately between 1,500Kwhr ~ 1,650Kw-hr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day.

 ACPV MODULES is one of the latest technology available in the market today and comes with a 25 full years warranty for both Solar Panels and Micro Inverters.

Components being installed for 4Kwp GRID-TIE Solar PV System:

The system is using ACPV MODULES with built-in APS Micro Inverter installed at the back of the Solar Panel.

• 16 sets of 260 Watts ACPV MODULE with built-in APS Micro-Inverter at the back of Solar Panels (i.e. Latest Technology PV System)
• 2 Units of 20A Miniature Circuit Breaker
• 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
• 1 piece ECU WI-FI Unit for Real Time Online Monitoring via WEB
• 1 piece 63A/2P/230V AC Disconnect Switch
• 1 set of Wall Mounted 4 holes Enclosure box
• 150meters of #12 THHN AWG Cable as a home run cable for grid connection.
• Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.

• Complete installation and commissioning.

The system is GRID-TIE. Its is designed to generate an estimated electrical output of approximately between 600Kwhr ~ 660Kwhr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~5.5 hrs per day.

 ACPV MODULES is one of the latest technology available in the market today and comes with a 25 full years warranty for both Solar Panels and Micro Inverters.

Components being installed for 500Wp GRID-TIE Solar PV System:

The system is using ACPV MODULES with built-in APS Micro Inverter installed at the back of the Solar Panel.

To carry out the complete installation of GRID-TIE  Solar System as follows:

• 2 sets of 260 Watts ACPV MODULE with built-in APS Micro-Inverter at the

Back of Solar Panel (i.e. Latest Technology PV System) Hybrid Design

• Units of 20A Miniature Circuit Breaker
• 1 Unit of 20KA~40KA / 385V AC Surge Protector Device
• 1 Unit Digital Meter for visual Monitoring of the PV System
• 1 set of Wall Mounted 3 holes Enclosure box
• 20m of 3.5mm sq. THHN Cable as a home run cable for grid connection.
• Complete set of installation materials such as Solar Panel Mounting

Aluminum Rails, Mid Clamps, End Clamps, L-Foot, MC4 connectors and other Micro Inverter cable accessories, screws, etc.

• Complete installation and commissioning.

NOTE: The system is GRID-TIE with no battery required. Its is designed to generate an estimated electrical output of approximately between 75Kwhr ~ 82.5Kwhr per month based on the Equivalent Sun Hours (ESH) of 5.0 ~ 5.5 hrs per day. A monthly saving of between P600 ~ P800 from your Electricity Bill.

 ACPV MODULES is one of the latest technology available in the market today and comes with a 25 full years warranty for both Solar Panels and Micro Inverters.